# Alinco DX-70 Cable **URL:** \ **Category:** Uncategorized\ **Tags:** alinco-dx-70\ **Created:** [January 28, 2023, 2:52pm UTC](https://forum.digirig.net/t/alinco-dx-70-cable/957 "2023-01-28T14:52:56Z")\ **Posts on this page:** 1\ **Showing post:** 16
**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\ **Post date:** [December 22, 2023, 4:40am UTC](https://forum.digirig.net/t/alinco-dx-70-cable/957/16 "2023-12-22T04:40:19Z")
This is timely! @vwstuart is setting out to wrangle cables to be able to connect the Digirig and maintain the mic connection for the Alinco DX-70: > [@Hardwire in parallel with Microphone contacts - Alinco DX-70](https://forum.digirig.net/t/hardwire-in-parallel-with-microphone-contacts-alinco-dx-70/2819): > > I use an Alinco DX-70 radio. I will be getting a digirig and proper cable for Christmas. In order to attach the cable to the Alinco, I have to remove the detachable front controls. Alinco did not design this to be removed often. Fragile looking wires abound. I am hoping to make a homebrew setup with both the microphone and the digirig connected (at the same time). I would not be talking with the digirig connected. I just don’t want to have to swap the cables everytime I switch from analog to di… Any ideas for them? 73 Constrainted --- _[View the full topic](https://forum.digirig.net/t/alinco-dx-70-cable/957)._