# At last! FT8 on iPad & iPhone! And it’s a great experience with GreylineFT8 And Digirig Lite

**URL:** https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659
**Category:** Uncategorized
**Tags:** mode-ft8
**Created:** [August 8, 2026, 10:23pm UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659 "2026-08-08T22:23:07Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![VK2AWN](https://forum.digirig.net/user_avatar/forum.digirig.net/vk2awn/32/4904_2.png) [@VK2AWN](https://forum.digirig.net/u/VK2AWN)
#### Post date: [August 8, 2026, 10:23pm UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659/1 "2026-08-08T22:23:07Z")

</div>

Hello,

I’ve finally got FT8 working well on my iPad thanks to a new app and a Digirig Lite. I’ve written it up in the following post.

Andrew [Vk2awn.net](http://Vk2awn.net)

> **[At last! FT8 on iPad & iPhone! And it’s a great experience with GreylineFT8](https://andrewwoodward.net/2026/08/08/260808greylineft8/)**
>
> At last! FT8 on iPad & iPhone! And it’s a great experience with GreylineFT8 #amateurradio #POTA #hamradio #ft8 #iPad #iPhone

---

<div class="post-metadata">

### Author: ![va3mzd](https://forum.digirig.net/user_avatar/forum.digirig.net/va3mzd/32/49_2.png) [@va3mzd](https://forum.digirig.net/u/va3mzd)
#### Post date: [August 12, 2026, 4:14pm UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659/2 "2026-08-12T16:14:17Z")

</div>

Wow ! Easy peasy setup, running FT8 in minutes!

I borrowed my DR Lite from my Linux computer running Greywolf, plugged it into the iPad, ran the KX3 DR cables into the DR Lite (without the black serial cable), started up the Greyline FT8, entered my credentials and within seconds I was decoding and minutes later, I had my first contact, W1AW/1 in the log, sent to QRZ automatically!

The PSK reporter integration is great, along with a host of other features.

So my next step is running Greyline on my older Lightning iPhone. This will save me carrying 2 phones, the iPhone for internet and Ham2K logging and the Android for running FT8CN.

This is an awesomely simple setup!

---

<div class="post-metadata">

### Author: ![va3mzd](https://forum.digirig.net/user_avatar/forum.digirig.net/va3mzd/32/49_2.png) [@va3mzd](https://forum.digirig.net/u/va3mzd)
#### Post date: [August 12, 2026, 5:05pm UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659/3 "2026-08-12T17:05:00Z")

</div>

Tried an Apple Lightning to USB 3 Camera adapter with my iPhone 13 but got an “USB Audio Device accessory requires too much power “ Error warning. The transmit audio is going out of the phone’s speaker and not through the adapter to the Digirig. Will think through an alternative or just get a new iPhone!

---

<div class="post-metadata">

### Author: ![va3mzd](https://forum.digirig.net/user_avatar/forum.digirig.net/va3mzd/32/49_2.png) [@va3mzd](https://forum.digirig.net/u/va3mzd)
#### Post date: [August 31, 2026, 5:05pm UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659/4 "2026-08-31T17:05:25Z")

</div>

Since my last reply where I was quickly able to set up FT8 with Greyline FT8, iPad, Digirig Lite and KX3 I also upgraded my iPhone from 13 to 17 Pro.

I tested the iPhone 17Pro with Digirig Lite and both KX3 and G90. Both worked right away, plug and play with Greyline FT8! This is by far the best super light mobile Digital solution. Will test it out with trusdx next.

Addendum- A cheap Amazon Lightning to USB-C adapter worked to connect my iPhone 13 running Greyline FT8 to the Digirig Lite and KX3. Receive, decode and transmit worked fine.

---

<div class="post-metadata">

### Author: ![KB0RB](https://forum.digirig.net/user_avatar/forum.digirig.net/kb0rb/32/5731_2.png) [@KB0RB](https://forum.digirig.net/u/KB0RB)
#### Post date: [September 28, 2026, 12:47am UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659/5 "2026-09-28T00:47:28Z")

</div>

Hey, neat! This is my software. Thanks for posting this @VK2AWN and for weighing int @va3mzd!

Always happy to support my users and make improvements as needed. If anyone out there is looking for an IC-705 solution for Greyline, please drop a comment on [Cable for Icom IC-705 and Mobile FT8](https://forum.digirig.net/t/cable-for-icom-ic-705-and-mobile-ft8/10725) and we will try and get one made!

---

<div class="post-metadata">

### Author: ![gmeader](https://forum.digirig.net/user_avatar/forum.digirig.net/gmeader/32/5702_2.png) [@gmeader](https://forum.digirig.net/u/gmeader)
#### Post date: [October 1, 2026, 4:55pm UTC](https://forum.digirig.net/t/at-last-ft8-on-ipad-iphone-and-it-s-a-great-experience-with-greylineft8-and-digirig-lite/10659/6 "2026-10-01T16:55:25Z")

</div>

One solution is to get an adapter (a multi-port USB-C hub) that includes a port for power and a port for the Digirig. That will ensure there is enough power for both the Digirig and the iPhone/iPad. You can use a power bank to power it all.

I found this hub and power necessary when using a Digirig Lite with an iPad Pro. Without it, the Digirig Lite operation was somewhat erratic.
