# Cable Connections for KX3 w/ KXPA100

**URL:** <https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055>\
**Category:** Uncategorized\
**Tags:** elecraft-kx3, elecraft-px3, elecraft-kx2\
**Created:** [February 8, 2023, 3:53pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055 "2023-02-08T15:53:21Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![W6BFK](https://forum.digirig.net/letter_avatar_proxy/v4/letter/w/2acd7d/32.png) [@W6BFK](https://forum.digirig.net/u/W6BFK)\
**Post date:** [February 8, 2023, 3:53pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/1 "2023-02-08T15:53:21Z")

</div>

Hello,

Has anyone successfully set up their digirig with a KX3 & KXPA100? I have mine on order with the KX3 cables but have not experimented with it yet?

73 & TU  
W6BFK

---

<div class="post-metadata">

**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\
**Post date:** [February 10, 2023, 5:55pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/2 "2023-02-10T17:55:17Z")

</div>

> [@Elecraft KX3 with Digirig mobile using Elecraft PX3](https://forum.digirig.net/t/elecraft-kx3-with-digirig-mobile-using-elecraft-px3/1060):
>
> If you are lucky enough to have an Elecraft KX3/PX3 pair, it works fine with Digirig mobile. Power off all Connect the Digirig Serial cable to the ACC1/PC port on the PX3. Connect Digirig Mic and Phone cables to KX3 MIC and Phone sockets Connect the PX3 to KX3 cable pair (ACC1 / RX-IO) Power on and use it. 73 WD0UG Doug

---

<div class="post-metadata">

**Author:** ![RusG](https://forum.digirig.net/letter_avatar_proxy/v4/letter/r/96bed5/32.png) [@RusG](https://forum.digirig.net/u/RusG)\
**Post date:** [June 3, 2023, 1:47am UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/3 "2023-06-03T01:47:44Z")

</div>

And, the KXPA100?

I imagine that will have to be manually activated because the KXPACBL is disconnected?

I actually don’t usually use it for digital anyway.

73, NQ6F, Rus

---

<div class="post-metadata">

**Author:** ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)\
**Post date:** [June 3, 2023, 8:11pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/4 "2023-06-03T20:11:25Z")

</div>

What connections do you need for connecting the PA?  
If it’s ACC1 (serial CAT) then you can either use radio without CAT control (PTT by RTS), use pass-through if PA offers that or come up with a Y-splitter for serial port.

---

<div class="post-metadata">

**Author:** ![Gene-B](https://forum.digirig.net/user_avatar/forum.digirig.net/gene-b/32/3730_2.png) [@Gene-B](https://forum.digirig.net/u/Gene-B)\
**Post date:** [December 15, 2024, 5:52pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/5 "2024-12-15T17:52:02Z")

</div>

Happened upon this. I’ve been using my KX3 and KXPA100 combo for some time. Cables between the KX3 and Amp as usual. Use the serial port on the DigiRig to the RS232(PC) connector on the amplifier. MAKE sure the DigiRig is configured for RS232 use. Lots of contacts on FT8 since getting my DigiRig.

73, Gene, KX1C

---

<div class="post-metadata">

**Author:** ![LA8MGA](https://forum.digirig.net/letter_avatar_proxy/v4/letter/l/eada6e/32.png) [@LA8MGA](https://forum.digirig.net/u/LA8MGA)\
**Post date:** [January 14, 2026, 9:30am UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/6 "2026-01-14T09:30:02Z")

</div>

![IMG_20260114_102350](https://forum.digirig.net/uploads/default/original/2X/b/b3847c256cbd31432fea8a13458e0cd12b35611f.jpeg)  
Is this the correct way to connect the KPA100 , KX3 and Digirig modem ?  
Not turned on yet 😎  
The black connector from the digirig (normaly connected to the kx3) now connected to the KPA100 RS232  
-73 de LA8MGA Arne

---

<div class="post-metadata">

**Author:** ![Gene-B](https://forum.digirig.net/user_avatar/forum.digirig.net/gene-b/32/3730_2.png) [@Gene-B](https://forum.digirig.net/u/Gene-B)\
**Post date:** [January 21, 2026, 2:55pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/7 "2026-01-21T14:55:32Z")

</div>

Looks okay without getting my KX3/KPA100 out to configure for digital use. Sorry, I can’t find my notes on the routing of cables. Been using my Yaesu FT-891 this past year for digital portable.  
KX1C

---

<div class="post-metadata">

**Author:** ![David\_Cowdin](https://forum.digirig.net/user_avatar/forum.digirig.net/david_cowdin/32/4065_2.png) [@David\_Cowdin](https://forum.digirig.net/u/David_Cowdin)\
**Post date:** [March 12, 2026, 3:19pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/8 "2026-03-12T15:19:53Z")

</div>

Hello Arne. Dave here (WD0HHU). I am trying to integrate my KX3 with the KPA100 & it appears that you have connected the black cable from ACC2 using the KX3 cable set over to the RS232 (PC) on the KPA100. Is this how you did this? 73s Dave (WD0HHU)

---

<div class="post-metadata">

**Author:** ![LA8MGA](https://forum.digirig.net/letter_avatar_proxy/v4/letter/l/eada6e/32.png) [@LA8MGA](https://forum.digirig.net/u/LA8MGA)\
**Post date:** [March 21, 2026, 8:32pm UTC](https://forum.digirig.net/t/cable-connections-for-kx3-w-kxpa100/1055/9 "2026-03-21T20:32:52Z")

</div>

Try that setup . But it did not work …Any ideas ?
