# Cab't get drivers for W10

**URL:** <https://forum.digirig.net/t/cabt-get-drivers-for-w10/2836>\
**Category:** Uncategorized\
**Tags:** driver-cp210x, os-windows\
**Created:** [December 25, 2023, 10:25pm UTC](https://forum.digirig.net/t/cabt-get-drivers-for-w10/2836 "2023-12-25T22:25:43Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ford2go](https://forum.digirig.net/letter_avatar_proxy/v4/letter/f/f1d935/32.png) [@ford2go](https://forum.digirig.net/u/ford2go)\
**Post date:** [December 25, 2023, 10:25pm UTC](https://forum.digirig.net/t/cabt-get-drivers-for-w10/2836/1 "2023-12-25T22:25:45Z")

</div>

Just tried to install Digirig and I get odd results

- no new ports show up (actually no ports show up at all – new format on w10?
- 2 new usb controllers
- 
  - 1 new device cp2102 called other - no device drivers found  
Tried 2 different USB ports - cable is only 3 feet long  
Trying to put a pic here of the after digi device driver  
 ![afterusb](https://forum.digirig.net/uploads/default/original/2X/7/7ed5da59fd0d07388826d0c3fb08233f4869dfad.jpeg)  
Hope that shows up

Harry KF0MAB

---

<div class="post-metadata">

**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\
**Post date:** [December 25, 2023, 10:33pm UTC](https://forum.digirig.net/t/cabt-get-drivers-for-w10/2836/2 "2023-12-25T22:33:32Z")

</div>

@ford2go That sounds frustrating. I am not running Windows 10, but I don’t want your question to go unanswered. Thanks for providing those screen captures. The OS does not display that the driver is from Silicon Labs, and says “no compatible drivers.”

When I [install the driver](https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers) from the Silicon Labs website on Windows 11, I get the following result in Device Manager, under Ports:

![image](https://forum.digirig.net/uploads/default/original/2X/1/16154894a86444cba04b5e7d54ee8a101ff9d0ef.png)

Did you get your driver from [silabs.com](http://silabs.com)?

73 Constrainted

---

<div class="post-metadata">

**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\
**Post date:** [December 26, 2023, 5:26am UTC](https://forum.digirig.net/t/cabt-get-drivers-for-w10/2836/3 "2023-12-26T05:26:42Z")

</div>

OK it looks like you posted success with drivers here:

> [@Just received the unit and "CP2102N USB to UART Bridge Controller" is the only I get](https://forum.digirig.net/t/just-received-the-unit-and-cp2102n-usb-to-uart-bridge-controller-is-the-only-i-get/2833/3):
>
> Thanks for saving my Christmas :). I went out there and got the drivers plus some tech docs. With any luck, I will get there. Have a good Holiday Season Harry KF0MAB

Congratulations! Glad I seemed to point you in the right direction.

73 Constrainted

---

<div class="post-metadata">

**Author:** ![ford2go](https://forum.digirig.net/letter_avatar_proxy/v4/letter/f/f1d935/32.png) [@ford2go](https://forum.digirig.net/u/ford2go)\
**Post date:** [December 26, 2023, 4:24pm UTC](https://forum.digirig.net/t/cabt-get-drivers-for-w10/2836/4 "2023-12-26T16:24:14Z")

</div>

I did get my driver, but being old and slow I haven’t installed it yet.

Thanks,

Harry KF0MAB
