# Digirig and Yaesu-FT5DR from scratch

**URL:** <https://forum.digirig.net/t/digirig-and-yaesu-ft5dr-from-scratch/4240>\
**Category:** Uncategorized\
**Tags:** software-soundmodem, yaesu-ft-5dr, mode-winlink\
**Created:** [August 21, 2024, 4:15pm UTC](https://forum.digirig.net/t/digirig-and-yaesu-ft5dr-from-scratch/4240 "2024-08-21T16:15:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![john19501](https://forum.digirig.net/letter_avatar_proxy/v4/letter/j/f19dbf/32.png) [@john19501](https://forum.digirig.net/u/john19501)\
**Post date:** [August 21, 2024, 4:15pm UTC](https://forum.digirig.net/t/digirig-and-yaesu-ft5dr-from-scratch/4240/1 "2024-08-21T16:15:44Z")

</div>

Hi everyone, my apologies in advance for reviving this topic but I am essentially starting from scratch. My question is, can someone provide me guidance to setup my FT5DR, laoptop and Soundmodem for Winlink operation. I have the cable from DR and believe I am ready to go. I am familiar with Soundmodem and have used it successfully with a Signalink. The DR will be a nice upgrade. I want to learn how to use it.

Could someone point me to instructions to setup the FT5DR for Winlink? I looked around here but no luck. I’m sure it is here and I have overlooked. 73, John - NO0I

---

<div class="post-metadata">

**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\
**Post date:** [August 21, 2024, 4:45pm UTC](https://forum.digirig.net/t/digirig-and-yaesu-ft5dr-from-scratch/4240/2 "2024-08-21T16:45:58Z")

</div>

> [@john19501](#):
>
> Could someone point me to instructions to setup the FT5DR for Winlink?

Maybe a Yaesu FT5DR user will respond.

In the meantime, if you follow the setup instructions for any HT, e.g. a Baofeng UV-5R, you will get 80-100% of the way to success. Unlike the Signalink, with the Digirig, you should choose to pull PTT rather than rely on VOX.

Let us know what you find.

73 Constrainted

---

<div class="post-metadata">

**Author:** ![tmatney98](https://forum.digirig.net/user_avatar/forum.digirig.net/tmatney98/32/334_2.png) [@tmatney98](https://forum.digirig.net/u/tmatney98)\
**Post date:** [August 22, 2024, 4:15am UTC](https://forum.digirig.net/t/digirig-and-yaesu-ft5dr-from-scratch/4240/3 "2024-08-22T04:15:05Z")

</div>

If someone should need some help they can dm me and I can attempt to walk you through…Caution…this is very tedious and time consuming sometimes…your odds may vary…

---

<div class="post-metadata">

**Author:** ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)\
**Post date:** [August 22, 2024, 10:19pm UTC](https://forum.digirig.net/t/digirig-and-yaesu-ft5dr-from-scratch/4240/4 "2024-08-22T22:19:53Z")

</div>

Except for the PTT method, your setup with Digirig will be similar to that with Signalink.  
Check out this post:

> [@Digirig with Winlink and UZ7HO soundmodem](https://forum.digirig.net/t/digirig-with-winlink-and-uz7ho-soundmodem/624):
>
> I’m not able to get this to TX. It RX no issues. I cannot locate anywhere to set the TX RTS in the soundmodem software. Anyone have this setup and working with packet Winlink? Thanks
