# DigiRig FT-857D CAT control turns radio off

**URL:** <https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924>\
**Category:** Uncategorized\
**Tags:** yaesu-ft-857d, os-linux\
**Created:** [July 4, 2025, 12:02am UTC](https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924 "2025-07-04T00:02:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![sirpuma](https://forum.digirig.net/letter_avatar_proxy/v4/letter/s/8e8cbc/32.png) [@sirpuma](https://forum.digirig.net/u/sirpuma)\
**Post date:** [July 4, 2025, 12:02am UTC](https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924/1 "2025-07-04T00:02:44Z")

</div>

Computer Lenovo with Linux Mint. I just ordered Data/CAT cables for the FT-857D. Radio is set to CAT. The second I complete the connection between the radio and the computer the radio turns off. If I set the radio to Linear or Tuner, it stays on. WSJT-X is able to hear, but I can’t get the settings right. But even with the program off, the second I make the connection, with the radio set to CAT in menu 20, the radio turns off and will not turn on until I disconnect the radio, either from the USB, Digirig or radio.

---

<div class="post-metadata">

**Author:** ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)\
**Post date:** [July 4, 2025, 9:20pm UTC](https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924/2 "2025-07-04T21:20:42Z")

</div>

What is the configuration of the Digirig you use? There was a recent discussion with the same symptoms reported:

> [@FT-897D Power Off](https://forum.digirig.net/t/ft-897d-power-off/6904):
>
> A while back I purchased a Digirig Mobile for various uses and projects. It’s been working fine (as best I can tell) since purchase. I recently purchased an FT-897D and wanted to be able to use the Digirig with it for CAT Control/Digital modes. With that, I purchased the FT-8XX Cables made by Digirig for the Digirig Mobile, and received them today. However, as soon as I attempted to use them, my 897D powered down. I’m using a switching power supply, that I regularly use for my FT-710 with n…

---

<div class="post-metadata">

**Author:** ![sirpuma](https://forum.digirig.net/letter_avatar_proxy/v4/letter/s/8e8cbc/32.png) [@sirpuma](https://forum.digirig.net/u/sirpuma)\
**Post date:** [July 6, 2025, 3:44am UTC](https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924/3 "2025-07-06T03:44:30Z")

</div>

So the digirig I originally ordered was listed as Digirig Mobile - Logic Levels (default). Since I was using it on an FT-847 you changed it to the RS-232 version per your email on 1/19/2025. Which version is needed for the FT-857D?

---

<div class="post-metadata">

**Author:** ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)\
**Post date:** [July 7, 2025, 10:34am UTC](https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924/4 "2025-07-07T10:34:21Z")

</div>

If you are connecting the serial port, with FT-857D the Digirig has to be in logic levels configuration. You can use it with just audio and PTT and in that case the configuration of the serial port does not matter. More on that here:

> **[Selecting Digirig Mobile Serial Configuration – digirig](https://digirig.net/selecting-digirig-configuration/)**

---

<div class="post-metadata">

**Author:** ![sirpuma](https://forum.digirig.net/letter_avatar_proxy/v4/letter/s/8e8cbc/32.png) [@sirpuma](https://forum.digirig.net/u/sirpuma)\
**Post date:** [July 8, 2025, 2:18am UTC](https://forum.digirig.net/t/digirig-ft-857d-cat-control-turns-radio-off/6924/5 "2025-07-08T02:18:24Z")

</div>

Then I will order one set for logic levels. I don’t want to have to change the configuration just to change the radio I’m connected to .
