# Digirig lite Ver 1.1

**URL:** https://forum.digirig.net/t/digirig-lite-ver-1-1/10615
**Category:** Uncategorized
**Tags:** digirig-lite
**Created:** [July 12, 2026, 7:48pm UTC](https://forum.digirig.net/t/digirig-lite-ver-1-1/10615 "2026-07-12T19:48:09Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Hanfling](https://forum.digirig.net/letter_avatar_proxy/v4/letter/h/3be4f8/32.png) [@Hanfling](https://forum.digirig.net/u/Hanfling)
#### Post date: [July 12, 2026, 7:48pm UTC](https://forum.digirig.net/t/digirig-lite-ver-1-1/10615/1 "2026-07-12T19:48:09Z")

</div>

Greetings - All.  
I purchased a Ver. 1.1 Digirig Lite. ( the PCB unit ) A while back.  
I wanted to put it to use as a backup.  
I have a Digirig with the Kenwood TM-71A set of cables. ( with Cat option ), as well.  
Do all the interface cables that Digirig sells work with the 1.1 Ver. ( No CAT of cause )

What are the big differences between the Ver 1.1 and current that I should lookout for.

Thanks for any help.

---

<div class="post-metadata">

### Author: ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)
#### Post date: [July 13, 2026, 11:17pm UTC](https://forum.digirig.net/t/digirig-lite-ver-1-1/10615/2 "2026-07-13T23:17:27Z")

</div>

Yes, all the cables are compatible. The configuration info from the current Digirig Lite tutorial applies to the unit you have - the differences between the revisions are of cosmetic nature.

---

<div class="post-metadata">

### Author: ![Hanfling](https://forum.digirig.net/letter_avatar_proxy/v4/letter/h/3be4f8/32.png) [@Hanfling](https://forum.digirig.net/u/Hanfling)
#### Post date: [July 13, 2026, 11:43pm UTC](https://forum.digirig.net/t/digirig-lite-ver-1-1/10615/3 "2026-07-13T23:43:26Z")

</div>

Thanks for taken the time to reply - K0TX.  
And thanks for the info.

Have a good one.