# Digirig mobile input attenuator
**URL:** https://forum.digirig.net/t/digirig-mobile-input-attenuator/560
**Category:** Uncategorized
**Created:** [November 18, 2022, 11:32pm UTC](https://forum.digirig.net/t/digirig-mobile-input-attenuator/560 "2022-11-18T23:32:44Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Greg](https://forum.digirig.net/u/Greg)
#### Post date: [November 18, 2022, 11:32pm UTC](https://forum.digirig.net/t/digirig-mobile-input-attenuator/560/1 "2022-11-18T23:32:44Z")
The audio from my FT-817 is too high and cannot be adjusted lower using the regular level controls. I took apart my digirig mobile to see if I could cut the trace between the ATT pads, but I do not see a trace. Does it come precut or do I just not see the trace?
---
### Author:  [@KI5VSJ](https://forum.digirig.net/u/KI5VSJ)
#### Post date: [November 19, 2022, 1:23am UTC](https://forum.digirig.net/t/digirig-mobile-input-attenuator/560/2 "2022-11-19T01:23:01Z")
The trace is hidden under the black coating.
---
### Author:  [@K0TX](https://forum.digirig.net/u/K0TX)
#### Post date: [November 19, 2022, 5:02am UTC](https://forum.digirig.net/t/digirig-mobile-input-attenuator/560/3 "2022-11-19T05:02:31Z")
No, the trace is just covered with the black solder mask like the rest of the copper that is not intended for soldering. Cut away!
---
### Author:  [@Greg](https://forum.digirig.net/u/Greg)
#### Post date: [November 20, 2022, 12:20am UTC](https://forum.digirig.net/t/digirig-mobile-input-attenuator/560/4 "2022-11-20T00:20:41Z")
That worked!
Thanks very much
VE7IGH