# FT-891 Into digirig mobile for JS8CALL

**URL:** https://forum.digirig.net/t/ft-891-into-digirig-mobile-for-js8call/2462
**Category:** Uncategorized
**Tags:** yaesu-ft-891, mode-js8call
**Created:** [October 12, 2023, 10:27pm UTC](https://forum.digirig.net/t/ft-891-into-digirig-mobile-for-js8call/2462 "2023-10-12T22:27:30Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)
#### Post date: [October 13, 2023, 5:16pm UTC](https://forum.digirig.net/t/ft-891-into-digirig-mobile-for-js8call/2462/2 "2023-10-13T17:16:23Z")

</div>

Lots of FT-891 related info is in this thread:

> [@Cables for Yaesu FT-891](https://forum.digirig.net/t/cables-for-yaesu-ft-891/16):
>
> Unlike other transceivers in FT-8xx lineup, Yaesu FT-891 does not expose the serial interface lines and instead implements serial CAT internally via its own USB connection. Only the cable with MiniDin6 connector is needed on the transceiver side. Plugged into Digirig’s audio port it takes care of minimum feature set required for digital modes: audio and PTT. The PTT switch is controlled via the RTS signal of Digirig’s COM port. The cable is available as part of [Yaesu FT-8xx cables kit](https://digirig.net/product/yaesu-ft-8xx-cords-for-digirig-mobile/). If opt…

JT8Call settings are pretty much the same as WSJT-X settings.

---

_[View the full topic](https://forum.digirig.net/t/ft-891-into-digirig-mobile-for-js8call/2462)._