# G90 digi rig mobile questions

**URL:** <https://forum.digirig.net/t/g90-digi-rig-mobile-questions/4700>\
**Category:** Uncategorized\
**Tags:** xiegu-g90, software-wsjtx\
**Created:** [October 28, 2024, 2:19am UTC](https://forum.digirig.net/t/g90-digi-rig-mobile-questions/4700 "2024-10-28T02:19:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![brian\_ishmael](https://forum.digirig.net/user_avatar/forum.digirig.net/brian_ishmael/32/3586_2.png) [@brian\_ishmael](https://forum.digirig.net/u/brian_ishmael)\
**Post date:** [October 28, 2024, 2:19am UTC](https://forum.digirig.net/t/g90-digi-rig-mobile-questions/4700/1 "2024-10-28T02:19:04Z")

</div>

So I had a heck of a time getting everything to work. I’m not pc savvy but still wasn’t plug and play. So I currently have two windows 11 pcs. Laptop is specifically for ft8 on my g90. I got everything to work but had to install Omni rig. My issues I am having currently on both my main pc and the laptop 10m I have the full 20watts transmit the lower I go the less power I get I’m at 6 watts on 20m and I have everything up to the max. Next issue I use the same antenna on each of these in the house. If I hook into my house main pc the monitor db is 60 + the entire time. If I go to my laptop it’s low I’ll include a few photos on 10m I have full 20watts.

 ![IMG_2294](https://forum.digirig.net/uploads/default/original/2X/e/eb62bc71a7a2658e6a659f4f6e6b35fc9504f06a.jpeg)  
 ![IMG_2293](https://forum.digirig.net/uploads/default/original/2X/f/ffb0884d7716c8404682c8187e36939652ca2903.jpeg)  
 ![IMG_2292](https://forum.digirig.net/uploads/default/original/2X/b/b5294101bbefe5ca28ed5c058044059f591d3274.jpeg)  
 ![IMG_2291](https://forum.digirig.net/uploads/default/original/2X/6/6a018977eec368291d2d1a24d69a55d185c28850.jpeg)  
 ![IMG_2290](https://forum.digirig.net/uploads/default/original/2X/2/208915c8a9d748de96868babd311596beb929c65.jpeg)

---

<div class="post-metadata">

**Author:** ![webmonkey](https://forum.digirig.net/user_avatar/forum.digirig.net/webmonkey/32/2494_2.png) [@webmonkey](https://forum.digirig.net/u/webmonkey)\
**Post date:** [October 28, 2024, 1:44pm UTC](https://forum.digirig.net/t/g90-digi-rig-mobile-questions/4700/2 "2024-10-28T13:44:30Z")

</div>

in wsjt-x ‘settings’, there is a checkbox for ‘remember power settings by band’  
check the ‘transmit’ box (and tune box if you like)

set the power slider in wsjt-x to give you the desired output on each band.  
my icoms are within a couple watts without doing this but my g90 requires it.

good luck

kb0wlf

---

<div class="post-metadata">

**Author:** ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)\
**Post date:** [October 29, 2024, 1:08am UTC](https://forum.digirig.net/t/g90-digi-rig-mobile-questions/4700/3 "2024-10-29T01:08:34Z")

</div>

The issue of TX power may related to the antenna rather than digital modes interface.  
Can you get the desired power on the air with CW key down?