# Identififing usb ports in use by digirig - linux mint

**URL:** <https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372>\
**Category:** Uncategorized\
**Tags:** troubleshoot-serial, os-linux\
**Created:** [March 12, 2026, 7:35pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372 "2026-03-12T19:35:37Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ians](https://forum.digirig.net/letter_avatar_proxy/v4/letter/i/b9bd4f/32.png) [@ians](https://forum.digirig.net/u/ians)\
**Post date:** [March 12, 2026, 7:35pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/1 "2026-03-12T19:35:37Z")

</div>

Hi

I’m a returning amateur after a 41 year absence, so please be gentle with me! Less than brilliant hearing and a lot of QRM has pushed me towards exploring digital modes.

So…

- Icom ic725
- brand new digirig mobile and rig specific cables
- usb lead that has data functionality
- thinpad x240 running linux mint 22.3 cinnamon
- wsjt-x

My (first?) problem is that I cannot identify the usb ports in use by digirig: I cannot see an unambiguous match between what linux reports, and the options in wsjt-x settings for the ports.

 ![Screenshot from 2026-03-12 18-20-00](https://forum.digirig.net/uploads/default/original/2X/e/e6b953db9d13803e9d402eae99436d89018e712a.png)

From the above I can see that the laptop finds digirig, but how does this relate to the port options in wsjt-x? Don’t let the above fool you into thinking I am good with terminal. I just type what I am told to!

---

<div class="post-metadata">

**Author:** ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)\
**Post date:** [March 13, 2026, 12:51am UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/2 "2026-03-13T00:51:50Z")

</div>

Here’s Digirig’s serial port:

 ![image](https://forum.digirig.net/uploads/default/original/2X/d/dcff7465ff6e49310bf0511e8a35f8cf2f5e6a6b.jpeg)

In the software configuration you’ll be referencing entities from under /dev/

**Key Identification Commands**

- **`lsusb`** : Lists connected USB devices; look for “Silicon Labs CP210x UART Bridge”.

- **`dmesg | grep ttyUSB`** : Shows kernel logs to confirm which `ttyUSBx` port the device attached to.

- **`ls -l /dev/ttyUSB*`** : Lists all active USB serial ports.

---

<div class="post-metadata">

**Author:** ![ians](https://forum.digirig.net/letter_avatar_proxy/v4/letter/i/b9bd4f/32.png) [@ians](https://forum.digirig.net/u/ians)\
**Post date:** [March 14, 2026, 3:42pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/3 "2026-03-14T15:42:00Z")

</div>

![Screenshot at 2026-03-14 15-27-40](https://forum.digirig.net/uploads/default/original/2X/5/5a413e275ef29945a75ced308b28e97bc0edfcbe.png)

So hopefully I’m correct to enter **/dev/ttyUSB0** as the serial port under CAT control in wsjt-x?

Had a go and not sure if I’m discovering another problem or still seeing a usb problem.

 ![Screenshot at 2026-03-14 15-36-08](https://forum.digirig.net/uploads/default/original/2X/7/7dc08284ed473165326a99a784875f8f005fe617.png)

---

<div class="post-metadata">

**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\
**Post date:** [March 14, 2026, 7:04pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/4 "2026-03-14T19:04:50Z")

</div>

Maybe check and perhaps change the file permissions on /dev/ttyUSB0 to allow the user running wsjt–x to read/write/execute.

Also, what’s going on with .config/hamlib\_settings? Does it exist, with proper permissions?

73 Constrainted

---

<div class="post-metadata">

**Author:** ![ians](https://forum.digirig.net/letter_avatar_proxy/v4/letter/i/b9bd4f/32.png) [@ians](https://forum.digirig.net/u/ians)\
**Post date:** [March 14, 2026, 8:07pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/5 "2026-03-14T20:07:52Z")

</div>

A bit of a search revealed that linux can be funny about ports due to legacy unix? stuff, and so I tried \*sudo adduser user dialout (\*my username being “user” on this laptop)

this seems to have changed something:

**Hamlib error: Communication timed out**

**Communication timed out**

**1:frame.c(455):icom\_transaction returning(-5) Communication timed out**

**../../../rigs/icom/icom.c(1682) trace  
set\_vfo\_curr: vfo=currVFO, curr\_vfo=currVFO  
set\_vfo\_curr: Asking for currVFO, currVFO=currVFO  
icom.c(9402):set\_vfo\_curr returning2(0)  
0:icom.c(1700):icom\_get\_freq returning(-5) Communication timed out**

**rig\_get\_freq(2147): freqMainA=0, modeMainA=, widthMainA=0  
rig\_get\_freq(2147): freqMainB=0, modeMainB=, widthMainB=0  
rig\_get\_cache(258): vfo=currVFO, current\_vfo=currVFO  
rig\_get\_cache(434): vfo=VFOA, freq=0, mode=, width=0  
rig\_set\_cache\_freq(121): vfo=currVFO, current\_vfo=currVFO  
-1:rig\_get\_freq: elapsed=8976ms  
Communication timed out  
Communication timed out  
while getting current frequency**

The timeout will presumably be due to me coming out of the shack (garden shed) and therefore the transceiver being unplugged - but it looks more positive - I’ll try in the morning with the radio plugged in, weather permitting.

Not sure what the .config/hamlib\_settings stuff implies -missing folder? However that error seems to have cleared now, oddly. A little knowledge is a dangerous thing, and I don’t really understand what I’m seeing.

---

<div class="post-metadata">

**Author:** ![ians](https://forum.digirig.net/letter_avatar_proxy/v4/letter/i/b9bd4f/32.png) [@ians](https://forum.digirig.net/u/ians)\
**Post date:** [March 15, 2026, 3:22pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/6 "2026-03-15T15:22:03Z")

</div>

Success - CAT control established, and wsjt-x playing nicely with the radio. I didn’t have permission to use the port!

Thanks for comments and assistance.

---

<div class="post-metadata">

**Author:** ![Constrainted](https://forum.digirig.net/user_avatar/forum.digirig.net/constrainted/32/2219_2.png) [@Constrainted](https://forum.digirig.net/u/Constrainted)\
**Post date:** [March 15, 2026, 9:30pm UTC](https://forum.digirig.net/t/identififing-usb-ports-in-use-by-digirig-linux-mint/10372/7 "2026-03-15T21:30:41Z")

</div>

Congratulations!

73 Constrainted
