I’m actually having the same issue. No PTT. (I think)
New to digital. So I don’t have a lot of background here. But here is my setup:
Windows 10 laptop
FLDIGI V4.x.x.x (the latest)
Digirig 1.9 (brand new)
Yaesu MiniDin10 9600-baud Data and CAT Cable for Digirig Mobile (Brand new)
FTM-6000R (also new)
The Digirig seems to be installed correctly on the laptop. Drivers Comm ports etc seem to be fine.
(Com12) . FLDIGI seems to be installed and configured using the DigiRig on Com12.
But when I try and test transmit from FLDIGI, nothing.
Here’s what I’ve tested:
Testing the data cable using the Quick and Dirty method above. When I short the data cable Sleeve and nearest Ring connector on the cable coming from the Radio, the radio transmits. That’s expected.
And when I put a pair of headphones into the audio jack of the Digirig, and select transmit on the FLDIGI, I head the expected modem tones in my headset. That is also expected.
But when I plug the data cable from the radio directly into the Digirig audio jack, and select transmit on the FLDIGI, nothing transmits.
PTT issue?
Software config?
I’m not sure where to go from here.
Any thoughts would be helpful. Thank you.