# RTTY over DMR? and Alinco DJ-MD5 series cable

**URL:** https://forum.digirig.net/t/rtty-over-dmr-and-alinco-dj-md5-series-cable/1944
**Category:** Uncategorized
**Tags:** alinco-dj-md5xlt, alinco-dj-md5
**Created:** [July 8, 2023, 9:01am UTC](https://forum.digirig.net/t/rtty-over-dmr-and-alinco-dj-md5-series-cable/1944 "2023-07-08T09:01:00Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![J\_B](https://forum.digirig.net/user_avatar/forum.digirig.net/j_b/32/1496_2.png) [@J\_B](https://forum.digirig.net/u/J_B)
#### Post date: [July 8, 2023, 9:01am UTC](https://forum.digirig.net/t/rtty-over-dmr-and-alinco-dj-md5-series-cable/1944/1 "2023-07-08T09:01:01Z")

</div>

Hoping to experiment using RTTY between HTs on FM using DMR on a simplex frequency. I know cables are available for the Anytone 878 series, but I have several of its cousin - the Alinco DJ-MD5XLT which is essentially the same radio minus bluetooth in a more compact package but uses a different speaker mic connector. I love the radio but the mic connector is unusual and I’m attempting to attach a picture and what I think is the pin out. My understanding is that it’s similar to some ancient Icom connectors that allowed for ordinary 3.5mm headphone connection to the speaker jack, which is a nice feature. Does anyone know if a connector is already available before I try to kluge one together? Thanks guys - K4JBN

 ![AlincoPlug](https://forum.digirig.net/uploads/default/original/2X/a/a00fbed63d6f11e76c5886764da530c1b98d2019.jpeg)

---

<div class="post-metadata">

### Author: ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)
#### Post date: [July 10, 2023, 6:08pm UTC](https://forum.digirig.net/t/rtty-over-dmr-and-alinco-dj-md5-series-cable/1944/2 "2023-07-10T18:08:03Z")

</div>

The pinout in your sketch matches:

- [ICOM HTs](https://digirig.net/product/icom-ht-cable/) - 10mm spacing and
- [FT-65R pinout](https://digirig.net/product/yaesu-ft65r-cable-for-digirig-mobile/) - 7.5mm spacing

11mm spacing is used in [Baofeng cables](https://digirig.net/product/baofeng-cords-kit-for-digirig-mobile/), but the pinout is different

---

<div class="post-metadata">

### Author: ![J\_B](https://forum.digirig.net/user_avatar/forum.digirig.net/j_b/32/1496_2.png) [@J\_B](https://forum.digirig.net/u/J_B)
#### Post date: [July 10, 2023, 7:54pm UTC](https://forum.digirig.net/t/rtty-over-dmr-and-alinco-dj-md5-series-cable/1944/3 "2023-07-10T19:54:55Z")

</div>

Thank you !