# TS2000 cat works, but no audio

**URL:** https://forum.digirig.net/t/ts2000-cat-works-but-no-audio/3730
**Category:** Uncategorized
**Tags:** troubleshoot-audio, kenwood-ts-2000
**Created:** [May 30, 2024, 9:26am UTC](https://forum.digirig.net/t/ts2000-cat-works-but-no-audio/3730 "2024-05-30T09:26:17Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Jasper\_van\_Heerden](https://forum.digirig.net/user_avatar/forum.digirig.net/jasper_van_heerden/32/2976_2.png) [@Jasper\_van\_Heerden](https://forum.digirig.net/u/Jasper_van_Heerden)
#### Post date: [May 30, 2024, 9:26am UTC](https://forum.digirig.net/t/ts2000-cat-works-but-no-audio/3730/1 "2024-05-30T09:26:17Z")

</div>

I’m using a TS2000 and a digirig mobile configured for RS232 and the Kenwood DB9 cords connected to the back of the radio.  
I use Omnirig to set my device (as i also like to use Log4om simultaneously).  
Cat control works just fine. But on WSJT-X I recieve no signals in the waterfall and the radio won’t key up if I try to tune it.  
Below are some screenshots of my settings. Any thoughts on how to fix this?

 ![afbeelding](https://forum.digirig.net/uploads/default/original/2X/d/dcad566c8953d4bd40419c49f25fb9bbbf93d790.png)  
 ![afbeelding](https://forum.digirig.net/uploads/default/original/2X/8/876784937e4f9975dbdc7b4977967fd4605bdf59.png)  
 ![afbeelding](https://forum.digirig.net/uploads/default/original/2X/4/4e303fb7942efdba2deb58e0b8c810baf816ef78.png)

---

<div class="post-metadata">

### Author: ![K0TX](https://forum.digirig.net/user_avatar/forum.digirig.net/k0tx/32/3_2.png) [@K0TX](https://forum.digirig.net/u/K0TX)
#### Post date: [May 30, 2024, 4:18pm UTC](https://forum.digirig.net/t/ts2000-cat-works-but-no-audio/3730/2 "2024-05-30T16:18:50Z")

</div>

Jasper,  
Thank you for sharing working CAT control settings for TS-2000.  
For audio, please start with the basic troubleshooting steps as shown here:

[![](https://img.youtube.com/vi/wBFFI-31tU0/maxresdefault.jpg "Audio Settings and Troubleshooting") ](https://www.youtube.com/watch?v=wBFFI-31tU0)

Please keep up posted on your findings.

---

<div class="post-metadata">

### Author: ![Jasper\_van\_Heerden](https://forum.digirig.net/user_avatar/forum.digirig.net/jasper_van_heerden/32/2976_2.png) [@Jasper\_van\_Heerden](https://forum.digirig.net/u/Jasper_van_Heerden)
#### Post date: [May 30, 2024, 5:11pm UTC](https://forum.digirig.net/t/ts2000-cat-works-but-no-audio/3730/3 "2024-05-30T17:11:17Z")

</div>

Thank you for responding! I tried to run the tests as shown in the video. The device is recognized by the computer. The digirig also shows a signal when i tune the radio. The loopback test didn’t work. I connected pins 3 and 11 (as shown in the TS2000 manual), used the tune function in WSJT-X and nothing happend. I also tried pin 1 and 11, which should be the secundairy channel output, and again nothing.

---

<div class="post-metadata">

### Author: ![scott\_reutter](https://forum.digirig.net/user_avatar/forum.digirig.net/scott_reutter/32/3872_2.png) [@scott\_reutter](https://forum.digirig.net/u/scott_reutter)
#### Post date: [January 22, 2025, 4:02am UTC](https://forum.digirig.net/t/ts2000-cat-works-but-no-audio/3730/4 "2025-01-22T04:02:05Z")

</div>

Jasper, u r not alone in this mine is doing same And the only way I got it to work Correctly Is use the PTT connection for the USDX interface for it so hopefully that helps