# TYT MD-380UV cable and support

**URL:** https://forum.digirig.net/t/tyt-md-380uv-cable-and-support/2708
**Category:** Uncategorized
**Tags:** tyt-md-380, baofeng-dm-5r, tyt-md-9600, radioddity-gd-77
**Created:** [November 28, 2023, 12:05am UTC](https://forum.digirig.net/t/tyt-md-380uv-cable-and-support/2708 "2023-11-28T00:05:10Z")
**Posts on this page:** 1
**Showing post:** 7

<div class="post-metadata">

### Author: ![pick](https://forum.digirig.net/letter_avatar_proxy/v4/letter/p/9de0a6/32.png) [@pick](https://forum.digirig.net/u/pick)
#### Post date: [November 29, 2023, 9:27pm UTC](https://forum.digirig.net/t/tyt-md-380uv-cable-and-support/2708/7 "2023-11-29T21:27:35Z")

</div>

I found information on the MD-9600 mic but unfortunately there were two conflicting pieces of information. I finally confirmed the correct one and have a schematic for the mic and the pinouts for the RJ-45 connector used.

Pin 1 - SW2  
Pin 2 - SW1  
Pin 3 - VCC (3.3v from radio)  
Pin 4 - Ground  
Pin 5 - Mic  
Pin 6 - PTT  
Pin 7 - NC  
Pin 8 - NC

[MD-9600 mic schematic.pdf](https://forum.digirig.net/uploads/short-url/4ALW9J4ZplXrcEXsO57tJq9qyrk.pdf) (409.5 K)

Pick

---

_[View the full topic](https://forum.digirig.net/t/tyt-md-380uv-cable-and-support/2708)._