# Winlink Express & KX2 with DigiRig

**URL:** https://forum.digirig.net/t/winlink-express-kx2-with-digirig/1819
**Category:** Uncategorized
**Tags:** elecraft-kx3, elecraft-kx2
**Created:** [June 10, 2023, 2:16pm UTC](https://forum.digirig.net/t/winlink-express-kx2-with-digirig/1819 "2023-06-10T14:16:30Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![VE3JSJ](https://forum.digirig.net/letter_avatar_proxy/v4/letter/v/b3f665/32.png) [@VE3JSJ](https://forum.digirig.net/u/VE3JSJ)
#### Post date: [June 10, 2023, 2:16pm UTC](https://forum.digirig.net/t/winlink-express-kx2-with-digirig/1819/1 "2023-06-10T14:16:30Z")

</div>

I have WInlink Express running well on my KX2 with the DigiRig. Contacts are good. Running with 5 watts RF.  
However when I try to adjust the ALC there is no ALC shown on the scale, so I set the MIC setting to around 50 which I used with my previous digitial interface. ALC is shown when using the microphone.  
Any suggestions as to how to get my ALC back with DigiRig ?