# \#icom-ic-229

**URL:** https://forum.digirig.net/tag/icom-ic-229/222.md

[Latest](https://forum.digirig.net/latest.md) · [Categories](https://forum.digirig.net/categories.md) · [Tags](https://forum.digirig.net/tags.md)

---

## [Cable for ICOM IC-229](https://forum.digirig.net/t/cable-for-icom-ic-229/1321)

<div class="topic-metadata">

**Author:** [@K0TX](https://forum.digirig.net/u/K0TX)\
**Replies:** 1\
**Last updated:** [November 5, 2024, 3:43am UTC](https://forum.digirig.net/t/cable-for-icom-ic-229/1321 "2024-11-05T03:43:12Z")

</div>

Like often the case with the mobile radios we’re getting the necessary signals from two separate connectors: Digirig’s audio cable should look like this: MIC pin 1 (MIC) → 3.5mm TRRS ring1 (RIG\_AFIN) MIC pin 5 (…

---

## [DigiRig Lite cable for Icom IC-229 Mobile](https://forum.digirig.net/t/digirig-lite-cable-for-icom-ic-229-mobile/4351)

<div class="topic-metadata">

**Author:** [@ucfargis1](https://forum.digirig.net/u/ucfargis1)\
**Replies:** 0\
**Last updated:** [September 4, 2024, 3:20pm UTC](https://forum.digirig.net/t/digirig-lite-cable-for-icom-ic-229-mobile/4351 "2024-09-04T15:20:33Z")

</div>

Dusted off my Icom 229H to use with Winlink. Using a TRRS B-O-B and an Arduino jumper set, here is what the cabling should look like. https://groups.io/g/VARA-MODEM/topic/digirig\_lite\_to\_icom\_229h/108265905