# \#icom-ic-7000 **URL:** https://forum.digirig.net/tag/icom-ic-7000/144.md [Latest](https://forum.digirig.net/latest.md) · [Categories](https://forum.digirig.net/categories.md) · [Tags](https://forum.digirig.net/tags.md) --- ## [Icom 7000. Digirig](https://forum.digirig.net/t/icom-7000-digirig/10493)
**Author:** [@Michaelv](https://forum.digirig.net/u/Michaelv)\ **Replies:** 1\ **Last updated:** [May 6, 2026, 6:25pm UTC](https://forum.digirig.net/t/icom-7000-digirig/10493 "2026-05-06T18:25:46Z")
I’m new to Digirig. I’m setting up my Icom 7000. I’m not getting any readings on VARA FM VU meter. When I use Auto tune, it keys the transmitter. The settings are the same as my Icom 9700 that doesn’t need a sound card… --- ## [Flrig settings for IC-7000](https://forum.digirig.net/t/flrig-settings-for-ic-7000/5706)
**Author:** [@K7GPS](https://forum.digirig.net/u/K7GPS)\ **Replies:** 16\ **Last updated:** [May 3, 2026, 6:17pm UTC](https://forum.digirig.net/t/flrig-settings-for-ic-7000/5706 "2026-05-03T18:17:20Z")
I could use some help with specific settings in fleig connected to a digirig connected to the data port of an Icom ic-7000. Current settings not working. Com 4 9600 8/1/none. In flrig xcvr is right ic-7000, update Com 4,… --- ## [IC-7000 & Digirig: Radio transmits carrier but no FT8 modulation (No spots on PSKReporter)](https://forum.digirig.net/t/ic-7000-digirig-radio-transmits-carrier-but-no-ft8-modulation-no-spots-on-pskreporter/10475)
**Author:** [@IZ5RIE](https://forum.digirig.net/u/IZ5RIE)\ **Replies:** 3\ **Last updated:** [April 26, 2026, 10:26pm UTC](https://forum.digirig.net/t/ic-7000-digirig-radio-transmits-carrier-but-no-ft8-modulation-no-spots-on-pskreporter/10475 "2026-04-26T22:26:58Z")
Hi folks! I am quite new to Digirig. I recently switched from an XGG interface (which I had to replace due to a hardware failure on the connector side). My Setup: HW: Icom IC-7000, MFJ-949E Manual Tuner, Digirig Mo… --- ## [Keying CW with DigiRig on IC-7000](https://forum.digirig.net/t/keying-cw-with-digirig-on-ic-7000/10256)
**Author:** [@Tuomo\_OH2KVL](https://forum.digirig.net/u/Tuomo_OH2KVL)\ **Replies:** 3\ **Last updated:** [January 23, 2026, 10:14pm UTC](https://forum.digirig.net/t/keying-cw-with-digirig-on-ic-7000/10256 "2026-01-23T22:14:32Z")
I’m using DigiRig and the correct cable set for IC-7000 (13-pin mini-DIN, CI-V). Everything else works: monitoring and controlling the radio, audio, digimodes and even PTT. But I haven’t been able to find the correct se… --- ## [Digirig version for IC-208H and IC-7000](https://forum.digirig.net/t/digirig-version-for-ic-208h-and-ic-7000/9198)
**Author:** [@KJ7ROX](https://forum.digirig.net/u/KJ7ROX)\ **Replies:** 1\ **Last updated:** [July 15, 2025, 9:51pm UTC](https://forum.digirig.net/t/digirig-version-for-ic-208h-and-ic-7000/9198 "2025-07-15T21:51:44Z")
I need to setup a hospital with Winlink capability on two radios. They have an IC-208H and an IC-7000 and from your site, it looks like the same cable set will work for both. I plan to use the combined cable. So… whic… --- ## [WSJT-X Only Displays Vertical Line (IC-7000)](https://forum.digirig.net/t/wsjt-x-only-displays-vertical-line-ic-7000/6295)
**Author:** [@diwangs](https://forum.digirig.net/u/diwangs)\ **Replies:** 11\ **Last updated:** [May 28, 2025, 2:46am UTC](https://forum.digirig.net/t/wsjt-x-only-displays-vertical-line-ic-7000/6295 "2025-05-28T02:46:12Z")
I bought a CI-V Digirig Mobile a while back and only recently tried WSJT-X. I’m facing difficulties in trying to make my ICOM IC-7000 work with it, mainly because WSJT-X only displays vertical line, similar to this issue… --- ## [What to buy for IC-7000 to laptop running WSJTx](https://forum.digirig.net/t/what-to-buy-for-ic-7000-to-laptop-running-wsjtx/6071)
**Author:** [@W4AWI](https://forum.digirig.net/u/W4AWI)\ **Replies:** 2\ **Last updated:** [April 28, 2025, 11:29pm UTC](https://forum.digirig.net/t/what-to-buy-for-ic-7000-to-laptop-running-wsjtx/6071 "2025-04-28T23:29:04Z")
I just learned about DigiRig and after scanning the site it looks like the best solution for the mobile shack, laptop (WSJTx) and an IC-7000. I can see I need the Digirig Mobile. Which CAT-Config? At the IC-7000 cable s… --- ## [ICOM-7000 with digirig mobile on JS8Call and Winlink Express](https://forum.digirig.net/t/icom-7000-with-digirig-mobile-on-js8call-and-winlink-express/5956)
**Author:** [@JosephKD0NBV](https://forum.digirig.net/u/JosephKD0NBV)\ **Replies:** 0\ **Last updated:** [April 17, 2025, 11:25pm UTC](https://forum.digirig.net/t/icom-7000-with-digirig-mobile-on-js8call-and-winlink-express/5956 "2025-04-17T23:25:47Z")
I finally got IC-7000 working with digirig on JS8call and winlink express. I’ve made a video that walks you through the 1) settings on the radio, 2) how to plug in the digirig to the radio and computer, 3) JS8call setti… --- ## [IC-7000, WJST-X Faults](https://forum.digirig.net/t/ic-7000-wjst-x-faults/5613)
**Author:** [@Bob](https://forum.digirig.net/u/Bob)\ **Replies:** 11\ **Last updated:** [March 12, 2025, 3:55am UTC](https://forum.digirig.net/t/ic-7000-wjst-x-faults/5613 "2025-03-12T03:55:44Z")
Hey y’all, I’ve been having this issue with my radio setup lately where it’ll perform like a champion on the digimodes, but after about 5 minutes WJST-X acts like it is receiving RFI. WJST-X seems to lose communication … --- ## [IC-7000 + DigiRig + FLRig](https://forum.digirig.net/t/ic-7000-digirig-flrig/5404)
**Author:** [@Bob](https://forum.digirig.net/u/Bob)\ **Replies:** 4\ **Last updated:** [March 8, 2025, 3:17am UTC](https://forum.digirig.net/t/ic-7000-digirig-flrig/5404 "2025-03-08T03:17:48Z")
Hey all, I recently acquired an IC-7000 and a digirig to go with it. I’ve been trying to get it to work on my windows computer via FLRig for use with WJST-X and WinLink to no avail. I have everything setup physically,… --- ## [RESOLVED: Icom IC-7000 No to Low Tx Audio Using Mini-DIN6 Cable](https://forum.digirig.net/t/resolved-icom-ic-7000-no-to-low-tx-audio-using-mini-din6-cable/5000)
**Author:** [@VE7IIF](https://forum.digirig.net/u/VE7IIF)\ **Replies:** 0\ **Last updated:** [December 21, 2024, 12:41am UTC](https://forum.digirig.net/t/resolved-icom-ic-7000-no-to-low-tx-audio-using-mini-din6-cable/5000 "2024-12-21T00:41:29Z")
This post is intended to replace my previous post of the same topic, which had a lot of diagnostic information within as I was seeking assistance from the community to help resolve the issue. Situation: Wanting to have … --- ## [PARTIALLY RESOLVED: Icom IC-7000 Low Tx Audio Using Mini-DIN6 Cable](https://forum.digirig.net/t/partially-resolved-icom-ic-7000-low-tx-audio-using-mini-din6-cable/4976)
**Author:** [@VE7IIF](https://forum.digirig.net/u/VE7IIF)\ **Replies:** 0\ **Last updated:** [December 15, 2024, 4:45am UTC](https://forum.digirig.net/t/partially-resolved-icom-ic-7000-low-tx-audio-using-mini-din6-cable/4976 "2024-12-15T04:45:00Z")
Problem: Winlink Packet/VARA FM et al under Windows 10/11 w/ an Icom IC-7000, using a DigiRig Mobile connected via DigiRig’s Mini-DIN6 cable produces very low transmit audio, and won’t connect to any nodes. Using DigiRig… --- ## [IC-7000 Din connection](https://forum.digirig.net/t/ic-7000-din-connection/4497)
**Author:** [@barry.wells](https://forum.digirig.net/u/barry.wells)\ **Replies:** 9\ **Last updated:** [November 10, 2024, 11:08pm UTC](https://forum.digirig.net/t/ic-7000-din-connection/4497 "2024-11-10T23:08:23Z")
Just pulled the IC-7000 out of storage to start setting it up. I am running FT857D, AT-878 and AT-578 on Digirig with no issues. The question I have is the cabling for the 7000. I have the ICOM with 13 pin connector. … --- ## [IC-7000 no audio into radio from digrig (JS8Call)](https://forum.digirig.net/t/ic-7000-no-audio-into-radio-from-digrig-js8call/4484)
**Author:** [@EthnTuttle](https://forum.digirig.net/u/EthnTuttle)\ **Replies:** 1\ **Last updated:** [September 22, 2024, 6:16pm UTC](https://forum.digirig.net/t/ic-7000-no-audio-into-radio-from-digrig-js8call/4484 "2024-09-22T18:16:00Z")
Ubuntu 22.04 Kernel: 6.5.0-1027-oem ICOM IC-7000 JS8Call App Image 4c8a2cf08d69da78f3c25cd0f2f457aec5763762e71746950ab255d87d2c4123 js8call-2.2.0-Linux-Desktop.x86\_64.AppImage Question up front: Which of these woul… --- ## [JS8Call with IC-7000](https://forum.digirig.net/t/js8call-with-ic-7000/4395)
**Author:** [@NASHWC](https://forum.digirig.net/u/NASHWC)\ **Replies:** 10\ **Last updated:** [September 11, 2024, 9:02pm UTC](https://forum.digirig.net/t/js8call-with-ic-7000/4395 "2024-09-11T21:02:53Z")
Using Windows 10 Pro OS and trying to get JS8Call setup using my IC7000. Searched this forum, searched YouTube, searched Google. Found nothing that helps me walk thru the settings required or any drivers I may be missing… --- ## [Cables for ICOM IC-7000](https://forum.digirig.net/t/cables-for-icom-ic-7000/3405)
**Author:** [@Robert\_Woodlief](https://forum.digirig.net/u/Robert_Woodlief)\ **Replies:** 1\ **Last updated:** [April 1, 2024, 1:28pm UTC](https://forum.digirig.net/t/cables-for-icom-ic-7000/3405 "2024-04-01T13:28:40Z")
Which cables are correct for the 7000? I’m currently using the 706 cables but having issues. --- ## [Errors after FT8 transmission](https://forum.digirig.net/t/errors-after-ft8-transmission/3385)
**Author:** [@Robert\_Woodlief](https://forum.digirig.net/u/Robert_Woodlief)\ **Replies:** 3\ **Last updated:** [March 30, 2024, 6:36pm UTC](https://forum.digirig.net/t/errors-after-ft8-transmission/3385 "2024-03-30T18:36:38Z")
Hello all. I setup my Icom IC-7000 for portable operation with a DigiRig for FT4 and FT8 operation while camping. Regardless of my power settings I keep getting an error message and after the initial broadcast, it stops … --- ## [ICOM IC-7000 problems connecting](https://forum.digirig.net/t/icom-ic-7000-problems-connecting/962)
**Author:** [@kd5nsk](https://forum.digirig.net/u/kd5nsk)\ **Replies:** 43\ **Last updated:** [February 28, 2024, 11:37pm UTC](https://forum.digirig.net/t/icom-ic-7000-problems-connecting/962 "2024-02-28T23:37:46Z")
I have an IC-7000 ,digirig, a " Yaesu MiniDin10 9600-baud Data and CAT Cable for Digirig Mobile", a " Icom IC-706 cords for Digirig Mobile". which show to be compatable with my IC-7000. I also have several os’s and machi… --- ## [Omnirig + Digirig + IC-7000](https://forum.digirig.net/t/omnirig-digirig-ic-7000/465)
**Author:** [@PaulTampien](https://forum.digirig.net/u/PaulTampien)\ **Replies:** 12\ **Last updated:** [December 12, 2023, 5:39am UTC](https://forum.digirig.net/t/omnirig-digirig-ic-7000/465 "2023-12-12T05:39:34Z")
I am trying to hook-up my IC-7000 for WSJT-X and keep getting a Omnirig port not available error. I have the Omnirig middleware set to come on upon power up with the IC-7000 as the rig. How is it supposed to know that t… --- ## [Blown CI-V Cable?](https://forum.digirig.net/t/blown-ci-v-cable/2464)
**Author:** [@alduhoo](https://forum.digirig.net/u/alduhoo)\ **Replies:** 5\ **Last updated:** [October 16, 2023, 7:24pm UTC](https://forum.digirig.net/t/blown-ci-v-cable/2464 "2023-10-16T19:24:16Z")
Hi, I’m having issues controlling my Icom IC-7000 using the serial port and CI-V cable. Everything was working fine until one day I switched to work on 20m (not sure if this is relevant) and for some reason I would get … --- ## [ICOM IC-7000 NO TX Audio on HF](https://forum.digirig.net/t/icom-ic-7000-no-tx-audio-on-hf/1829)
**Author:** [@KB6HOH](https://forum.digirig.net/u/KB6HOH)\ **Replies:** 7\ **Last updated:** [July 8, 2023, 11:32pm UTC](https://forum.digirig.net/t/icom-ic-7000-no-tx-audio-on-hf/1829 "2023-07-08T23:32:48Z")
Greetings All! OS Windows 10pro Data Port 6pin MiniDin I have a new Digirig with CI-V. Using the Black Radio Date Cable NOT the Green. I have FULL CAT control including PTT. I have tested Packet on VHF into a Dummy …