# \#icom-ic-910h

**URL:** https://forum.digirig.net/tag/icom-ic-910h/127.md

[Latest](https://forum.digirig.net/latest.md) · [Categories](https://forum.digirig.net/categories.md) · [Tags](https://forum.digirig.net/tags.md)

---

## [IC-910H CI-V cable](https://forum.digirig.net/t/ic-910h-ci-v-cable/10420)

<div class="topic-metadata">

**Author:** [@w8vkd](https://forum.digirig.net/u/w8vkd)\
**Replies:** 2\
**Last updated:** [March 27, 2026, 4:44pm UTC](https://forum.digirig.net/t/ic-910h-ci-v-cable/10420 "2026-03-27T16:44:32Z")

</div>

I am awaiting my Digirig mobile configured for the Icom CI-V. The input to the radio’s CI-V is a 2 conductor 3.5mm plug. Can I use a 2 conductor cable from the Digirig to the radio or do I need a custom cable for the 4…

---

## [Icom IC-910H and Digirig Mobile wih WSJT-X rx ok but no TX audio out?](https://forum.digirig.net/t/icom-ic-910h-and-digirig-mobile-wih-wsjt-x-rx-ok-but-no-tx-audio-out/10397)

<div class="topic-metadata">

**Author:** [@VE4TM](https://forum.digirig.net/u/VE4TM)\
**Replies:** 1\
**Last updated:** [March 20, 2026, 3:08pm UTC](https://forum.digirig.net/t/icom-ic-910h-and-digirig-mobile-wih-wsjt-x-rx-ok-but-no-tx-audio-out/10397 "2026-03-20T15:08:04Z")

</div>

I am trying to setup my IC-910H with the Digirig mobile for Q65, it decodes fine, keys the rig but there is no audio out. Any suggestions or has anyone had a simmilar issue?

---

## [Interface to HRD was working but now it does not recognize the frequency](https://forum.digirig.net/t/interface-to-hrd-was-working-but-now-it-does-not-recognize-the-frequency/4278)

<div class="topic-metadata">

**Author:** [@Klynn76565](https://forum.digirig.net/u/Klynn76565)\
**Replies:** 8\
**Last updated:** [August 28, 2024, 6:58pm UTC](https://forum.digirig.net/t/interface-to-hrd-was-working-but-now-it-does-not-recognize-the-frequency/4278 "2024-08-28T18:58:47Z")

</div>

Im using a Icom 910h with Ham Radio Deluxe. The challenge im having started when i disconnected my rig to use for Field day. since then i cannot get HRD to recognize my radio. I did not change any menu items on the rig. …

---

## [Cables for ICOM IC-910H](https://forum.digirig.net/t/cables-for-icom-ic-910h/399)

<div class="topic-metadata">

**Author:** [@K0TX](https://forum.digirig.net/u/K0TX)\
**Replies:** 1\
**Last updated:** [August 28, 2024, 4:08am UTC](https://forum.digirig.net/t/cables-for-icom-ic-910h/399 "2024-08-28T04:08:50Z")

</div>

This transceiver uses standard MiniDin6 connector for audio and PTT. The 1200 baud version can be found in Yaesu FT-8xx cables kit and 9600 baud version is available separately. For serial CAT control IC-910H uses CI-V …

---

## [Proper cables for Icom IC-910H](https://forum.digirig.net/t/proper-cables-for-icom-ic-910h/2702)

<div class="topic-metadata">

**Author:** [@John\_Klewer](https://forum.digirig.net/u/John_Klewer)\
**Replies:** 2\
**Last updated:** [November 27, 2023, 3:57pm UTC](https://forum.digirig.net/t/proper-cables-for-icom-ic-910h/2702 "2023-11-27T15:57:11Z")

</div>

Excited to get the Digirig Mobile on the air…the site referred to a set of cables for the IC-706 which included CI-V serial cable and another cable with a 13-pin DIN which the IC-910 does not use. Searching the site aga…