# \#software-varahf **URL:** https://forum.digirig.net/tag/software-varahf/114.md [Latest](https://forum.digirig.net/latest.md) · [Categories](https://forum.digirig.net/categories.md) · [Tags](https://forum.digirig.net/tags.md) --- ## [Digirig mobile and Panasonic Toughbooks](https://forum.digirig.net/t/digirig-mobile-and-panasonic-toughbooks/10740)
**Author:** [@M7ZAK](https://forum.digirig.net/u/M7ZAK)\ **Replies:** 3\ **Last updated:** [October 4, 2026, 11:01pm UTC](https://forum.digirig.net/t/digirig-mobile-and-panasonic-toughbooks/10740 "2026-10-04T23:01:47Z")
Hi, does anyone have any recommendations for Panasonic Toughbook CF33 Mk 1 or 2 or the cf 20? I have a Xiegu G20 and want to use Winlink Vara HF and JS8Call. Any advice appreciated. --- ## [Xiegu G90 Winlink Vara HF n JS8Call](https://forum.digirig.net/t/xiegu-g90-winlink-vara-hf-n-js8call/10739)
**Author:** [@M7ZAK](https://forum.digirig.net/u/M7ZAK)\ **Replies:** 4\ **Last updated:** [October 4, 2026, 10:55pm UTC](https://forum.digirig.net/t/xiegu-g90-winlink-vara-hf-n-js8call/10739 "2026-10-04T22:55:33Z")
Been at this problem for days. I have a Xiegu G90 v 1.81 + Digi link v 1.9 + Winlink Ezpress Vara HF and licence. Connecting to various RMS stations can hear and see the modem working on sdr monitors but not receiving an… --- ## [Kenwood ts-480 radio settings for varahf](https://forum.digirig.net/t/kenwood-ts-480-radio-settings-for-varahf/10700)
**Author:** [@leachj](https://forum.digirig.net/u/leachj)\ **Replies:** 0\ **Last updated:** [September 12, 2026, 2:14pm UTC](https://forum.digirig.net/t/kenwood-ts-480-radio-settings-for-varahf/10700 "2026-09-12T14:14:59Z")
Setting up for winlink using varahf. I need radio and varahf settings. As it stands, when I start a session, the radio immediately goes into transmit. What mode should be selected on radio or does it matter? what rad… --- ## [Vara AC always waiting for frequency to clear when looks/sounds clear](https://forum.digirig.net/t/vara-ac-always-waiting-for-frequency-to-clear-when-looks-sounds-clear/10602)
**Author:** [@Hrogers532](https://forum.digirig.net/u/Hrogers532)\ **Replies:** 1\ **Last updated:** [July 8, 2026, 7:47am UTC](https://forum.digirig.net/t/vara-ac-always-waiting-for-frequency-to-clear-when-looks-sounds-clear/10602 "2026-07-08T07:47:14Z")
Can hardly beacon/CQ/connect. Always stating waiting for frequency to clear. I adjust the audio input on the modem up and down but keeping it in the green 98% of the time. I’m sure it’s a easy fix but I don’t know what… --- ## [Vara AC/HF waterfall only half but js8 waterfall fine](https://forum.digirig.net/t/vara-ac-hf-waterfall-only-half-but-js8-waterfall-fine/10599)
**Author:** [@Hrogers532](https://forum.digirig.net/u/Hrogers532)\ **Replies:** 2\ **Last updated:** [July 1, 2026, 10:04am UTC](https://forum.digirig.net/t/vara-ac-hf-waterfall-only-half-but-js8-waterfall-fine/10599 "2026-07-01T10:04:46Z")
Trying to trouble shoot some issues when it comes to connecting with other folks on VARA HF, a lot of times the connection is spotty then just dies all together. It’s happening enough to believe that maybe it’s an issue … --- ## [FT-891 with Digirig DR891 and VARA HF](https://forum.digirig.net/t/ft-891-with-digirig-dr891-and-vara-hf/10536)
**Author:** [@KE9CQP](https://forum.digirig.net/u/KE9CQP)\ **Replies:** 1\ **Last updated:** [May 27, 2026, 2:19am UTC](https://forum.digirig.net/t/ft-891-with-digirig-dr891-and-vara-hf/10536 "2026-05-27T02:19:48Z")
I’m trying to configure VARA HF with my Digirig DR891 and the FT-891. In Vara HF version 4.9.0, there are a couple settings that I’m not sure how to set with the DR891. Should I select “USB” or “USB Digital” ? Sho… --- ## [Settings for Elecraft KX2 and Winlink/RMS express](https://forum.digirig.net/t/settings-for-elecraft-kx2-and-winlink-rms-express/4663)
**Author:** [@K0TX](https://forum.digirig.net/u/K0TX)\ **Replies:** 4\ **Last updated:** [May 17, 2026, 3:12am UTC](https://forum.digirig.net/t/settings-for-elecraft-kx2-and-winlink-rms-express/4663 "2026-05-17T03:12:39Z")
Mark AC9DE shares his settings: KX2 settings for Winklink express.pdf (324.3 KB) --- ## [Running Digirig Mobile, KX3, Windows 11 and VARA HF](https://forum.digirig.net/t/running-digirig-mobile-kx3-windows-11-and-vara-hf/10435)
**Author:** [@royord](https://forum.digirig.net/u/royord)\ **Replies:** 2\ **Last updated:** [May 12, 2026, 10:44pm UTC](https://forum.digirig.net/t/running-digirig-mobile-kx3-windows-11-and-vara-hf/10435 "2026-05-12T22:44:22Z")
I was challenged the other day on the digirig forum to produce documentation that showed how to use Winlink/Vara HF with a KX3. I have all of the hardware and have created connections before but had never documented them… --- ## [Has Anyone Out There Got A Digirig Mobile To Work With A KX3 & Winlink VARA HF](https://forum.digirig.net/t/has-anyone-out-there-got-a-digirig-mobile-to-work-with-a-kx3-winlink-vara-hf/10384)
**Author:** [@David\_Cowdin](https://forum.digirig.net/u/David_Cowdin)\ **Replies:** 8\ **Last updated:** [April 5, 2026, 4:12am UTC](https://forum.digirig.net/t/has-anyone-out-there-got-a-digirig-mobile-to-work-with-a-kx3-winlink-vara-hf/10384 "2026-04-05T04:12:37Z")
Hello! I’ve gotten my Digirig Mobile to work with a Elecraft KX3 but I now want to go one step further and get it to work with Winlink. If you have, could you tell me what settings you use to get it work with Winlink/VA… --- ## [Winlink, VARA, Kenwood TS450](https://forum.digirig.net/t/winlink-vara-kenwood-ts450/10405)
**Author:** [@Jasond](https://forum.digirig.net/u/Jasond)\ **Replies:** 4\ **Last updated:** [March 24, 2026, 3:36pm UTC](https://forum.digirig.net/t/winlink-vara-kenwood-ts450/10405 "2026-03-24T15:36:25Z")
Well, I am back. I got FT8 working great with my TS450. Now I’m on to winlink and vara hf. Where can I get some info on setting this up? There is no option for this radio in VARA and everything I have tried doesn’t c… --- ## [Need Some Configuration Help with Digirig and VARA HF](https://forum.digirig.net/t/need-some-configuration-help-with-digirig-and-vara-hf/10359)
**Author:** [@HarleySoltes](https://forum.digirig.net/u/HarleySoltes)\ **Replies:** 7\ **Last updated:** [March 10, 2026, 4:30pm UTC](https://forum.digirig.net/t/need-some-configuration-help-with-digirig-and-vara-hf/10359 "2026-03-10T16:30:48Z")
I am having issues with my Digirig setup using Winlink Express and VARA HF. My Digirig is working fine on all other modes. I have a Digirig Mobile and an ICOM M803. My Digirig works fine with the setup using FLDIGI and … --- ## [DigiRig PTT with Winlink Express](https://forum.digirig.net/t/digirig-ptt-with-winlink-express/3175)
**Author:** [@BartKindt](https://forum.digirig.net/u/BartKindt)\ **Replies:** 4\ **Last updated:** [February 19, 2024, 2:16am UTC](https://forum.digirig.net/t/digirig-ptt-with-winlink-express/3175 "2024-02-19T02:16:09Z")
I have a FT-100 which has CAT, but Winlink Express does not support the CAT PTT function for this radio. So I have to use the PTT function via the audio plug. I purchased the Digirig with the combined cable for FT-8xx … --- ## [Winlink unable to open serial port](https://forum.digirig.net/t/winlink-unable-to-open-serial-port/6682)
**Author:** [@ac7sr](https://forum.digirig.net/u/ac7sr)\ **Replies:** 6\ **Last updated:** [June 9, 2025, 1:00pm UTC](https://forum.digirig.net/t/winlink-unable-to-open-serial-port/6682 "2025-06-09T13:00:21Z")
Trying to setup Digirig Mobile with Yaesu FT-857. – Windows 11 upgraded from Windows 10 pro. – Another laptop able to connect just fine. – I’ve tried changing the port number – I have no other software running needin… --- ## [Digirig mobile & Winlink on Yaesu FT-100 not working](https://forum.digirig.net/t/digirig-mobile-winlink-on-yaesu-ft-100-not-working/5528)
**Author:** [@VE3JXX](https://forum.digirig.net/u/VE3JXX)\ **Replies:** 7\ **Last updated:** [March 1, 2025, 2:25am UTC](https://forum.digirig.net/t/digirig-mobile-winlink-on-yaesu-ft-100-not-working/5528 "2025-03-01T02:25:14Z")
I have a Yaesu FT-100 that I’m using for portable ops, I have winlink running on a Digirig. I had it working on Vara FM, but I cant seem to get it working on Vara HF. I have tried almost every option, If I “tune” on Vara… --- ## [DigiRig Mobile FT857D CAT via MIC input doesn't work on VARA HF](https://forum.digirig.net/t/digirig-mobile-ft857d-cat-via-mic-input-doesnt-work-on-vara-hf/5321)
**Author:** [@ko4wx](https://forum.digirig.net/u/ko4wx)\ **Replies:** 3\ **Last updated:** [February 4, 2025, 3:07pm UTC](https://forum.digirig.net/t/digirig-mobile-ft857d-cat-via-mic-input-doesnt-work-on-vara-hf/5321 "2025-02-04T15:07:28Z")
Recently installed new DigiRig Mobile with FT857D cables. Have an FC-30 tuner installed, that requires using the rear CAT jack. Wired and tested an adapter similar to IZ0INX mod to send RX D, TX D and GND through the MIC… --- ## [Config Instructions for Yaesu FT-857 and Winlink](https://forum.digirig.net/t/config-instructions-for-yaesu-ft-857-and-winlink/672)
**Author:** [@K7RCR](https://forum.digirig.net/u/K7RCR)\ **Replies:** 8\ **Last updated:** [April 15, 2023, 12:23pm UTC](https://forum.digirig.net/t/config-instructions-for-yaesu-ft-857-and-winlink/672 "2023-04-15T12:23:12Z")
Hello, I have created a cheat sheet for configuring DigiRig for an ft857 and Winlink. I would think they would work for any Yaesu ft 8x7 but don’t know for sure. The assumption is you are using the factory data and C… --- ## [Icom 706 MKII G](https://forum.digirig.net/t/icom-706-mkii-g/5115)
**Author:** [@allsfine](https://forum.digirig.net/u/allsfine)\ **Replies:** 9\ **Last updated:** [February 1, 2025, 7:09am UTC](https://forum.digirig.net/t/icom-706-mkii-g/5115 "2025-02-01T07:09:42Z")
Having trouble with the PTT settings for Winlink Vara HF. The rig control is working as it should. It will either go and stay in the transmit mode or not transmit period. Anyone have settings for this rig and mode? --- ## [Digirig and FT-891 with VaraHF](https://forum.digirig.net/t/digirig-and-ft-891-with-varahf/4518)
**Author:** [@jeklyng](https://forum.digirig.net/u/jeklyng)\ **Replies:** 1\ **Last updated:** [September 28, 2024, 12:52am UTC](https://forum.digirig.net/t/digirig-and-ft-891-with-varahf/4518 "2024-09-28T00:52:28Z")
I am having some difficulties setting up the new FT-891 digirig with Winlink Vara HF. I got the CAT control to work, but since the new digirig is specifically built for the FT-891 and there is no COM port for it, how do … --- ## [Icom 735 cord kit question](https://forum.digirig.net/t/icom-735-cord-kit-question/4504)
**Author:** [@k7kwa](https://forum.digirig.net/u/k7kwa)\ **Replies:** 2\ **Last updated:** [September 24, 2024, 11:05pm UTC](https://forum.digirig.net/t/icom-735-cord-kit-question/4504 "2024-09-24T23:05:09Z")
This is going to be a dumb question but here goes. I now have my rig up on winlink vara hf with the din cord 100%. What the cord with the green end used for? Thanks kelly k7kwa --- ## [Vara hf won't key ic-735](https://forum.digirig.net/t/vara-hf-wont-key-ic-735/4496)
**Author:** [@k7kwa](https://forum.digirig.net/u/k7kwa)\ **Replies:** 7\ **Last updated:** [September 24, 2024, 2:42pm UTC](https://forum.digirig.net/t/vara-hf-wont-key-ic-735/4496 "2024-09-24T14:42:48Z")
Help please. confirm I have cable in the right sockets and under radio drop down no listing for ic-735 is shown. would appreciate any help. --- ## [How to set up xiegu g90 with digirig mobile and winlink for vara hf](https://forum.digirig.net/t/how-to-set-up-xiegu-g90-with-digirig-mobile-and-winlink-for-vara-hf/746)
**Author:** [@AG5KR](https://forum.digirig.net/u/AG5KR)\ **Replies:** 5\ **Last updated:** [September 24, 2024, 2:32am UTC](https://forum.digirig.net/t/how-to-set-up-xiegu-g90-with-digirig-mobile-and-winlink-for-vara-hf/746 "2024-09-24T02:32:59Z")
I have plug the cables in to the digirig and the g90 that came with the digirig. I can not get winlink to work with vara hf. when I tune I adjust the sound settings but still get an ALC of 100 and 0.0 watts. The g90 i… --- ## [Looking for correct settings for Digirig+truSDX on VARA HF Winlink](https://forum.digirig.net/t/looking-for-correct-settings-for-digirig-trusdx-on-vara-hf-winlink/2450)
**Author:** [@boyet401](https://forum.digirig.net/u/boyet401)\ **Replies:** 10\ **Last updated:** [September 13, 2024, 8:22pm UTC](https://forum.digirig.net/t/looking-for-correct-settings-for-digirig-trusdx-on-vara-hf-winlink/2450 "2024-09-13T20:22:22Z")
Hi, I’ve been trying to make my Digirig+truSDX work on VARA HF Winlink, but had been unsuccessful so far. The issue is which radio should I use for the settings. If I use Kenwood Amateur or Kenwood TS590S radio models as… --- ## [Vara fm and vara hf](https://forum.digirig.net/t/vara-fm-and-vara-hf/3807)
**Author:** [@Sara\_Engizek](https://forum.digirig.net/u/Sara_Engizek)\ **Replies:** 5\ **Last updated:** [June 20, 2024, 7:44pm UTC](https://forum.digirig.net/t/vara-fm-and-vara-hf/3807 "2024-06-20T19:44:00Z")
Hello, in VARA HF version 4.7.7, there is an encryption section. Has anyone tried this? I would like to know about the results. Also, is there anyone who can share VARA FM version 4.3.6? I am having difficulty finding pr… --- ## [FT857D - Winlink](https://forum.digirig.net/t/ft857d-winlink/3572)
**Author:** [@barry.wells](https://forum.digirig.net/u/barry.wells)\ **Replies:** 7\ **Last updated:** [May 2, 2024, 10:15pm UTC](https://forum.digirig.net/t/ft857d-winlink/3572 "2024-05-02T22:15:42Z")
FT857D - Winlink, Windows 10. So the issue is, that it will not send a unintelligible tone using USB. So I switched it to DIG and it sounds somewhat correct but will not connect to the Winlink RMS. I was able to test … --- ## [FT-817 PC Audio-in overload](https://forum.digirig.net/t/ft-817-pc-audio-in-overload/3571)
**Author:** [@BartKindt](https://forum.digirig.net/u/BartKindt)\ **Replies:** 7\ **Last updated:** [April 30, 2024, 4:15am UTC](https://forum.digirig.net/t/ft-817-pc-audio-in-overload/3571 "2024-04-30T04:15:55Z")
EDIT: It is the FT-817, not the FT-857. I have the latest Digirig with the Yaesu FT-8xx cords for Digirig Mobile - Combined Cable I am trying it on my FT-817 and VARA-HF. Problem is that the PC audio input is totally … --- ## [Winlink through VARA-FM on Yaesu FT-818 - not connecting, no signal](https://forum.digirig.net/t/winlink-through-vara-fm-on-yaesu-ft-818-not-connecting-no-signal/1767)
**Author:** [@Oldie](https://forum.digirig.net/u/Oldie)\ **Replies:** 35\ **Last updated:** [June 19, 2023, 12:11am UTC](https://forum.digirig.net/t/winlink-through-vara-fm-on-yaesu-ft-818-not-connecting-no-signal/1767 "2023-06-19T00:11:16Z")
Trying to work Winlink through VARA-FM on Yaesu FT-818, but having problems. Telnet works fine. I’m trying to send my email message via radio through the closest VARA-FM station, which is 9 km (5.6 mi) away. VARA-FM m… --- ## [BPQ32 using a digirig on a Kenwood TS590 without internal soundcard Transmit](https://forum.digirig.net/t/bpq32-using-a-digirig-on-a-kenwood-ts590-without-internal-soundcard-transmit/2999)
**Author:** [@Thurman\_Roberson](https://forum.digirig.net/u/Thurman_Roberson)\ **Replies:** 4\ **Last updated:** [January 21, 2024, 7:47am UTC](https://forum.digirig.net/t/bpq32-using-a-digirig-on-a-kenwood-ts590-without-internal-soundcard-transmit/2999 "2024-01-21T07:47:45Z")
Does anyone know how to get the digirig transmitting on BPQ32 using vara hf software on a kenwood ts590s that the internal soundcard went bad appreciate any help Robby AA5AF --- ## [Setup notes - TX-500, WinLink, VARA HF, Windows](https://forum.digirig.net/t/setup-notes-tx-500-winlink-vara-hf-windows/2969)
**Author:** [@K0TX](https://forum.digirig.net/u/K0TX)\ **Replies:** 0\ **Last updated:** [January 14, 2024, 7:03pm UTC](https://forum.digirig.net/t/setup-notes-tx-500-winlink-vara-hf-windows/2969 "2024-01-14T19:03:44Z")
Setup notes for TX-500 by Marc KC9WIB Winlink VARA HF TX-500 Digirig.pdf (517.2 KB) --- ## [VarAC v8.2.0, Vara HF v4.7.7, truSDX, Digirig v1.9, Windows11 working configuration](https://forum.digirig.net/t/varac-v8-2-0-vara-hf-v4-7-7-trusdx-digirig-v1-9-windows11-working-configuration/2540)
**Author:** [@Constrainted](https://forum.digirig.net/u/Constrainted)\ **Replies:** 0\ **Last updated:** [October 27, 2023, 9:13pm UTC](https://forum.digirig.net/t/varac-v8-2-0-vara-hf-v4-7-7-trusdx-digirig-v1-9-windows11-working-configuration/2540 "2023-10-27T21:13:07Z")
I recently upgraded to VarAC v8.2.0. It is a keyboard mode which uses Vara HF modem. I used Digirig v1.9 with truSDX firmware 2.00i successfully in the past with v7.x.x, and also with this new VarAC v8.2.0. I use Digi… --- ## [Xiegu g90 + Digirig + Winlink will not TX](https://forum.digirig.net/t/xiegu-g90-digirig-winlink-will-not-tx/2201)
**Author:** [@w7mvg](https://forum.digirig.net/u/w7mvg)\ **Replies:** 3\ **Last updated:** [August 25, 2023, 5:32pm UTC](https://forum.digirig.net/t/xiegu-g90-digirig-winlink-will-not-tx/2201 "2023-08-25T17:32:41Z")
I’m trying to use Winlink and Vara HF with my g90 and digirig. It seems like I have everything setup correctly, and it seems like Vara HF is hearing audio from the radio, but I cannot get it to TX. I am able to use WSJT… [Next page](https://forum.digirig.net/tag/software-varahf/114.md?match_all_tags=true&page=1&tags%5B%5D=software-varahf)