Question about using this with an Alinco DR-150. The 150 has a 2.5mm 9600 baud packet jack. (pg. 63 of the user’s manual: http://www.146970.com/PDFs/Alinco%20-%20DR-150T%20Instruction%20Manual.pdf). Do you know if connecting through the 9600 baud jack would allow me to use VARA FM wide? Would I need to rewire the cable to route the receive audio from the ring on the 2.5mm jack to ring 2 on the 3.5mm jack to the Digirig (instead of receive audio coming from pin 6 from the GX16 mic connector)? Thanks very much for any thoughts.