Interface cable for LEIXEN VV-898S

[K0TX]

Dennis,
Thank you for the pinout info. Please check out this post:

Cable for Leixen VV-898

Based on the pinout in this article (credit to Nick, M0NFE) the audio cable for Digirig will look like this: RJ45 pin 3 (GND) → 3.5mm TRRS sleeve (GND) RJ45 pin 4 (PTT) → 3.5mm TRRS ring 2 (PTT) RJ45 pin 5 (MIC-) → RJ45 pin 3 (GND) RJ45 pin 6 (MIC+) → 3.5mm TRRS ring 1 (RIG_AFIN) RJ45 pin 7 (RX) → 3.5mm TRRS ring 1 (RIG_AFOUT) Looks like Chirp programming is possible with logic levels configuration of the serial port RJ45 pin 3 (GND) → 3.5mm TRRS sleeve (GND) RJ45 pin 4 (RXD) → 3.5mm TRR…