Cable for Retevis RT95

[K0TX]

I don’t have a cable for this radio, but found the pinout:

From the manual it looks like this transceiver is heavily “inspired” by Anytone AT-778UV. For more info on the homebrew cable build please see the post below. At some point it may be added to the store. Please signup for the email updates on the homepage if you would like to be notified.

Cable for Anytone AT-778UV

Like in case of many mobile transceivers we’ll need to gather required signals from multiple connectors: [image] [image] The audio must come out of the headphone jack, though there is a bit of a gacha there. [image] The amp uses a bridge-tied load (BTL) design while Digirig expects unbalanced input against the ground. [image] We can either: use an audio transformer from tip and sleeve on transceiver side to primary winding and from secondary winding to ground and RIG_AFOUT on Digirig…