Cables for Yaesu FT-890 & Yaesu FT-900

[KD6YPD]

The FT-890 and FT-900 are very close relatives.

You could try something like this that I did for the FT-900.

Cable for Yaesu FT-900

[image] Audio signals in FT-900 can be found on 3.5mm TRS socket: [image] Serial CAT control lines and PTT can be found on 6 pin MiniDin socket: [image] The pinout cable for Digirig should be as follows: 3.5mm tip (DATA IN) → audio 3.5mm TRRS ring1 (RIG_AFIN) 3.5mm ring (DATA OUT) → audio 3.5mm TRRS tip (RIG_AFOUT) 3.5mm sleeve (GND) → audio 3.5mm TRRS sleeve (GND) MiniDin6 pin 1 (GND) → serial 3.5mm TRRS sleeve (GND) MiniDin6 pin 2 (SERIAL OUT) → serial 3.5mm TRRS ring 1 (RIG_TXD) M…