Digirig, WOAD, FT-60

I know this post is a bit dated.
But I finally got my FT-60R/DigiRig/WoAD (on a Samsung A52) setup to work.
Using Dan’s settings (from here Digirig support in WoAD), open the squelch, and minimal volume, about 9 o’ clock. This seems to be important, as anything else was apparently over-driving and the node kept responding with “Reject”.
Click “Run”.
Then click “Send”.
Watch the WoAD log to see what’s happening, and if possible, monitor on a second radio.

Maybe this helps someone.

Martin

1 Like