No Transmit Power on FT-891 Meter

[K0TX]

I don’t recall posting a video with instructions for DR-891, but make sure you use this tutorial for settings:

Digirig DR-891 Setup Manual – digirig

The tutorial is centered around WSJT-X as an example and I would suggest giving that a try to rule out VaraHF settings which are much more involving.

As far as VaraHF goes, here are the settings for that:

Digirig and FT-891 with VaraHF

Here’s a way to use PTT by GPIO3 of Digirig DR-891 or Digirig Lite: in Vara Setup enable RA-Board PTT: [image] In Sound Card setup select Digirig’s sound devices and board 1: [image] Here’s what I had in Winlink’s radio setup (COM4 is Enhanced) [image] The PTT Port setting in last screen may be switching PTT method to PTT by CAT. Setting it to “External”, which I think falls back to RA-Board PTT, also works. I’m not personally experienced with Winlink so maybe somebody who uses it re…