K0TX
August 17, 2023, 3:33pm
4
There were reports of gpsd messing with Digirig thinking that it found a compatible hardware. This could be the reason you see that the port is associated with gps, while in fact it can still be Digirig’s port. See if these help:
I ran into some trouble using Digirig with my Raspberry Pi that turned out to be unrelated to the Digirig itself. I thought I’d share what I learned here in case it’s helpful to others.
I used KM4ACK’s excellent Build a Pi script to set up a Raspberry Pi for radio tasks. I made some homebrew cables, after carefully studying the Digirig schematic and adding some important modifications to my old Icom IC-751A .
Before connecting the Digirig to the transceiver, I set up the rig in fldigi, making s…
Pi recognized ttyUSB0
pnp is installed when plugging in digirig with data cable and digirig
connected Yaesu HT with that special cable to digirig to the AUDIO connection
turned off all audio setting except pnp
selected digital output and input mono (tried other combinations also)
adjusted different levels on the pnp’s
website said: USBAUTO=“false” in /etc/default/gpsd but no gpsd in this
directory (gps not installed).
No ptt. PLEASE what am I missing?
THANK YOU in advance!
1 Like